Micro 45 Elbow

Specification

Pressure Ratings comply with calculations in accordance with ANSI code for Pressure Piping B31.3,Process Piping
Working Pressure ratings determined at room temperature with gasket materials shown.
Plating :
Female nuts are plated with silver. Chemical processes used for cleaning, electropolishing, and passivation may remove plating. Damaged or removed plating may cause thread galling, damage of fitting components and prevention of a proper seal.
Packing :
Packing is performed in cleaning room (Class 10/1000) All Products are double packed.
Metal seal fittings of both BA and EP fittings are covered with blue and yellow caps respectively
Cleaning :
– Passivation in Nitric environment
– Ultra-sonic cleaning with minimum 18MΩ of D.I water after passivation
Testing :
– Helium leak rate of 1 x 10^-9 torr.l/sec
– International Standard, SEMI SPEC F1-96

Material	Designator	Specification
SUS316L Double Melt (VAR)	D/M	ASTM A276, ASTM SA479

ASFLOW

Classifications

Product

Size

Brand	Classifications		Product		Size
ASFLOW	C	Clean Fittings	MOE	Micro 45 Elbow	02	1/8”	6M	6 ㎜
					04	1/4”	8M	8 ㎜
					06	3/8”	10M	10 ㎜
					08	1/2”	12M	12 ㎜
					10	5/8”	18M	18 ㎜
					12	3/4”

Ordering No.	Size (OD)	OD	ID	B (㎜)	L (㎜)	F (Body Cube) (㎜)	Working Pressure Bar(psig)
AC-MOE04	1/4″	6.35	4.35	6.35	10.32	7.94	351(5100)
AC-MOE06	3/8″	9.53	7.53	6.35	11.91	11.11	227(3300)
AC-MOE08	1/2″	12.70	10.22	6.35	13.50	14.29	254(3700)
AC-MOE6M	6M	6.00	4.00	6.35	10.10	7.94	420(6095)
AC-MOE8M	8M	8.00	6.00	6.35	11.91	11.11	310(4499)
AC-MOE10M	10M	10.00	8.00	6.35	11.91	11.11	240(3483)
AC-MOE12M	12M	12.00	10.00	6.35	13.49	14.29	200(2902)