Specification
- Pressure Ratings comply with calculations in accordance with ANSI code for Pressure Piping B31.3,Process Piping
- Working Pressure ratings determined at room temperature with gasket materials shown.
- Plating :
Female nuts are plated with silver. Chemical processes used for cleaning, electropolishing, and passivation may remove plating.
Damaged or removed plating may cause thread galling, damage of fitting components and prevention of a proper seal. - Packing :
Packing is performed in cleaning room (Class 10/1000) All Products are double packed.
Metal seal fittings of both BA and EP fittngs are covered with blue and yellow caps respectively - Cleaning :
– Passivation in Nitric environment
– Ultra-sonic cleaning with minimum 18MΩ of D.I water after passivation - Testing :
– Helium leak rate of 1 x 10-9 torr.l/sec
– International Standard, SEMI SPEC F1-96
Materials
|
Material |
Designator |
Specification |
|
|---|---|---|---|
|
Gland Bodies |
SUS316L Single Melt (VOD) |
S/M |
ASTM A276 ASTM SA 479 |
|
SUS316L Double Melt (VAR) |
D/M |
||
|
Gasket |
SUS316L |
316L |
ASTM A167 |
|
Nickel |
Ni |
ASTM B162 |
|
|
Nut |
SUS316 / 316L |
316/316L |
ASTM A276 |
|
SUS304 |
304 |
ASTM A 493 / JIS G 4318 |
Temperature Ratings
|
Type |
Material |
Temperature, °F (℃) |
|---|---|---|
|
Fitting |
SUS316L Single Melt (VOD) |
1000 (537) |
|
SUS316L Double Melt (VAR) |
||
|
Gasket |
SUS316L |
1000 (537) |
|
Nickel |
40 (204) |
Internal Surface Finish Levels
|
Designator |
Surface Finish (Ry) |
Surface Finish (Ra) |
|---|---|---|
|
Maximum |
Maximum |
|
|
BA |
3.0 ㎛ |
10 μinch |
|
EP |
0.7 ㎛ |
5 μinch |
Ordering Information
|
Brand |
Classifications |
Product |
Size |
|||||
|---|---|---|---|---|---|---|---|---|
|
ASFLOW |
C |
Clean Fittings |
ALGM |
ATW Long Gland-M |
02 |
1/8” |
6M |
6 ㎜ |
|
04 |
1/4” |
8M |
8 ㎜ |
|||||
|
06 |
3/8” |
10M |
10 ㎜ |
|||||
|
08 |
1/2” |
12M |
12 ㎜ |
|||||
|
10 |
5/8” |
18M |
18 ㎜ |
|||||
|
12 |
3/4” |
|||||||
Dimension
|
Ordering Number |
Head Size |
Tube Size (OD) |
OD |
ID |
A (㎜) |
B (㎜) |
D (㎜) |
T (㎜) |
Working Pressure bar(psig) |
|
|---|---|---|---|---|---|---|---|---|---|---|
|
NI |
316L |
|||||||||
|
AC-ALGM04 |
1/4″ |
1/4″ |
6.35 |
4.35 |
43.70 |
19.10 |
0.50 |
7.37 |
351(5100) |
|
|
AC-ALGM06 |
3/8″ |
3/8″ |
9.53 |
7.53 |
46.26 |
19.10 |
0.75 |
10.41 |
227(3300) |
|
|
AC-ALGM08 |
1/2″ |
1/2″ |
12.70 |
10.22 |
46.52 |
19.10 |
1.02 |
13.97 |
241(3500) |
|
|
AC-ALGM08-04 |
1/2″ |
1/4″ |
6.35 |
4.35 |
46.00 |
19.10 |
0.50 |
7.37 |
241(3500) |
|
|
AC-ALGM12 |
3/4″ |
3/4″ |
19.05 |
15.75 |
52.62 |
19.10 |
1.02 |
20.32 |
165(2400) |
|
|
AC-ALGM16 |
1″ |
1″ |
25.40 |
22.10 |
59.92 |
20.00 |
1.02 |
26.92 |
165(2400) |
|
